Web Administrator Interface; Ip Address Setting; Connection To The Cla - OPTOKON EDFA User Manual

10 Web administrator interface

10.1

IP address setting

The CLA device contains default setting for ETH0
For connection set on your PC IP address e.g. 192.168.0.11 with same mask
255.255.255.0
Use for connection UTP cable (CLA accessories) to the CLA and to your PC.
10.2

Connection to the CLA

Run a web browser (Internet Explorer, Opera, Mozilla etc.) and use https
protocol.
Default address for connection to the CLA:
Note: The certificate will not be valid probably. User can load its certificate later via web
interface (chapter 9.10 System).
Available two login accounts:
Administrator
Username:
admin
Password:
claadmin
Available area:
*1 User account is disabled – enable user account by web interface (chapter 9.10 System).
*2 Password is changeable by web interface (chapter 9.10 System).
NET_IP 192.168.0.10
NET_MASK 255.255.255.0
NET_GATEWAY 192.168.0.1
https://192.168.0.10/
Username:
Password:
(2)
Available area:
SUMMARY
AMPLIFIER
HEALTH
NETWORK
SNMP
POSTMAN
LOG
SYSTEM
RESTORE
23
EDFA optical amplifier – user manual
Standard USER
user
(1)
clauser
(2)
SUMMARY