Language Selection Functionality; User Controls & Indications; Headphone Connectors - Danish Interpretation Systems DCS 6000 User Manual

Danish Interpretation Systems
Speaker stand
This unit can always turn
on except if 8 units with
'Speak priority"=5
open
Saving setting in CU 60xx
If individual settings are to remain in the units after
the SW 6000 is closed, the settings can be stored in
the CU 60xx by saving the setting.
When saving the configuration the changes in the
settings, which have been done in the various
menus in CU 60xx, at the IS 6132 Interpreter Sets,
at AO 6004/6008 Audio Unit or in the Conference
Units (Individual settings) will be saved in the
'Flash' memory in the CU 60xx.

Language Selection functionality

Language selection is a feature, where the delegate
can listen to either the floor (spoken) language or an
interpreted language.
User Controls & Indications
The units featuring language selection will include
on or two sets of the following controls and
interfaces.
Display
This display is used for information purposes. This
display has built in back light.
Channel buttons (two)
The buttons are used for changing the channel
setting.
Volume buttons (two)
The buttons are used for changing the volume
setting.
26
Automatic
is
4
Also the serial number and type of all units
connected to the CU 60xx at the time of saving the
configuration will be saved in the 'Flash' memory
in the CU 60xx.
When 'loading' a configuration the last settings,
which has been saved in the 'Flash' memory in the
CU 60xx will be re-loaded to the CU 60xx, to the
IS 6132 Interpreter Sets to the AO 6004/6008
Audio Unit and to the Delegate Units.
When switching the power to the CU 60xx OFF and
then ON, the last saved setting will also be loaded.

Headphone connectors

Headphone connector (mini-jack)
A mini jack located on the front plate for
connecting a headphone for listening to the floor
language or one of the interpreted languages.
Dual headphone connectors (mini-jack)
Some units are supplied with two mini jacks located
on the front plate for connecting a headphone for
listening to the floor language or one of the
interpreted languages.
Important:
For units, where the two channels are operated
separately the following has to be observed:
If the two channel selectors are in use (headphones
inserted), the loudspeaker is disabled with the exception
of the DC 6990P.
Headphone Connector (Molex) (only "F"
models)
Manual 01 18 04467
User Manual
<=