JVC RX-DVSSL Instructions Manual page 71

n
For DVD Player
SOLUTION
POSSIBLE CAUSE
The video cord is not connected
correctly.
PROBLEM
No picture is displayed on the TV. Connect the cord correctly (see pages 8 and
9).
Select the correct input on the TV
Replace the disc (see page 29).
Change the scanning mode to
"INTERLACE" (see page 14).
TV input selection is incotrect.
The disc is not playable.
The scanning mode is set to
"PROGRESSIVE" though the unit is
connected to the TV which does not
support the progressive video input,
such as a conventional TV.
No picture is displayed on the TV
scnxn, the picture is blurred. or the
picture is divided into two parts.
The loaded disc may be illegally
copied.
Consult with the disc vendor. No sound is heard and "NO AIJDIO"
appears on the display.
~_I
A disc cannot be played. The unit's and disc's Region Code
numbers are incompatible
Replace the disc (see page 29).
Parental Lock is in use. Enter your password to change the parental
level (see pages 55 and 56).
Insert the disc correctly (set page 15). A disc cannot he played and "0:OO"
appears on the display.
The disc is loaded with its label and
data sides inverted.
The unplayable disc is loaded.
The disc is scratched ot- dirty.
Replace the disc (see page 29).
Replace or clean the disc (see page 66) Video and audio are distorted
Connect the unit and TV directly A VCR is connected between the unit
and the TV.
With some discs. a picture may he
blurred when setting "PROGRESSIVE
MODE" to "FILM" or "AUTO."
Set "PROGRESSIVE MODE" to "VIDEO"
(see page 5 I )
"MULTI CH" or "L/R ONLY" appears
on the display.
The picture does not fit the TV screen
The current track prohibits you from
playing hack with stereo sound.
"MONITOR TYPE" is not set correctly.
Activate Surround mode (see page 43) or
listen to another track.
Set the monitor type correctly (see page 51).
Set the TV correctly.
Set the video output mode correctly
according to the video connection between
your TV and the unit (see page 22).
Some discs are programmed to always
display no ruhtitle initially. If this happens,
press SUBTITLE on the remote control
after starting play (see page 35).
Some discs are programmed to always use
the original language initially. If this
happens, press AUDIO on the remote
control after starting play (see page 35)
The TV is not set correctly
The video output mode setting is
incorrect
properly.
One-touch DVD playback does not
work though you have conncctcd A\/
COMPU LINK cord cot-i-ectly.
No subtitle appears on the TV screen
though you have selected as your initial
subtitle language
---~~~.
Audio language is different from the
one you have selected as
YOLK
initial
audio language.
68