Table of Contents
Advertisement
Notes:
When the input level of the analog source is too high, the sound\
will be distorted. If this happens. you need to attenuate the input
signal level to prevent the sound dislortion.
l
You have to make this ad.ju\tment for each analog source.
On the front panel ONLY
INPUTA"
Press and hold INPUT ATT. (INPUT ANALOG/
DIGITAL)
until the INPUT ATT indicator lights up
on the display.
l
Each time you press and hold the button, the Input Attenuator
turns on ("ATT ON") or off ("ATT NORMAL"").
INPUT ATT indicator
L
@iJib
": "ATT NORMAL"
is the initial setting.
ATT NORMAL
: NOI-mally select this. The analog sound is not
attenuated.
ATT ON
: Select thi\ when the analog sound is
distorted.
This unit supports the progressive scanning system (480~") as well
as the conventional interlaced scanning system (48Oi").
If your TV has component video
jacks
and supports the progressive
video input. you can enjoy a high quality picture from the built-in
DVD player.
l
Refer also to the instruction manuals supplied with your TV.
l
You can select the progressive mode according to the original
picture type (film ot- video source). See page 5 I.
l
Do not change the scanning mode to "PROGRESSIVE"
in the
following cases:
~ When your TV does not support the progressive video input.
- When you do not conncc~ your TV to the unit using component
video cord.
From the remote control ONLY
&
..,
Press and hold PROGRESSIVE
for more than 3
seconds when DVD is selected as the source.
The current scanning mode appears on the display for a while.
l
Each time you press and hold the button, the scanning mode
changes "INTERLACE"::'
and "PROGRESSIVE"
alternately.
'h "INTERLACE"
is the initial setting.
INTERLACE
: Select this for conventional TV.
PROGRESSIVE
: Select this if your TV with component
,jacks supports the progressive video input.
The PROGRESSIVE indicator light\ up.
l
Some progressive
TVs and High-Definition
TVs are not fully
compatible
with this system. When the unnaturaal picture is played
back, change the scanning
mode to "INTERLACE."
To check the
compatibility
of your TV; contact your dealer.
All JVC progressive
TVs and High-Definition
TVs are fully
compatible
with this system respective/y
* When you select "PROGRESSIVE"as
the scanning mode, the
picture does not come out correcfly
through composite
video and
S-video jacks.
480~ and 480i indicate the number of scanning lines and scanning
format of an image signal.
~ 480~ indicates 480 scanning
lines with progressive
format.
- 480i indicates 480 scanning lines with inter/aced
format.
When you play back the multichannel sources, Recording mode
enables you to record the sounds without missing surround elements
by down-mixing the center and rear channel signals into the front
channel signals.
l
For DVD AUDIO ONLY: When the multichannel track cannot be
down-mixed, this function does not take effect.
* When the multichannel software is played back with Recording
mode activated, the sounds are down-mixed and come out through
the front speakers only.
On the front panel ONLY
&
REC MODE
Press and hold REC MODE (SURROUND MODE)
until "RECMODE
ON" appears on the display.
l
Each time you press and hold the button, Recording mode is
activated ("RECMODE
ON") and deactivated
("RECMODE
OFF"*) alternately.
<' "RECMODE
OFF" is the initial setting.
RECMODE
OFF : Normally select this. The down-mixing is
canceled.
RECMODE
ON
: Select this for recording the down-mixed
sounds.
When recording with VCR:
You can record the picture on your video tape without the volume
level indication when Recording mode is activated.
l
When you do not want to record the on-screen guide icons, see
page 54.
l
The choice menu and on-screen bar are always recorded when
they appear on the TV.
CAUTION:
When the front speakers are small, the output sound may be distorted
by Recording mode. In this case, decrease the volume until the sound
distortion diminishes.
Notes:
* When you turn off the unit or select another source, Recording
mode is canceled
("RECMODE
OFF).
l
Sound adjustments
(see pages 23 and 24) and Surround modes
(see pages 2.5 to 28) do not affect the recording.
0 The following buttons do not work while Recording
mode is
activated
("RECMODE
Ow):
- SETTlNG
and ADJUST on the front pane/
- SURROUND
ON/OFF and SURROUND
MODE on the front
pane/
~ Number buttons for adjusting sound on fhe remote control
14
Advertisement
Table of Contents
