Table of Contents
Advertisement
Notes:
When playing back the ~ourcc with Surround mode. you can ad,juat
the speaker output levels for Surround modes.
Once you have adjtlsted
the
Sur-round modes, the adjustment is
memorized for each source'.
l
You can also adjust Surround modes casing the Choice menu (see
pages 49 to 54) or hutton~ on the front panel (SK page 24).
l
When using test tone, you can ad,just the {peaker output levels
without playback sounds.
1 Select and play back software you like.
2 Activate and select Surround mode.
* When 2-channel source is played back, you can select
Surround modes.
3 Adjust the sound.
1) Press CONTROL
repeatedly so that
"SOUND"
appears on the operation mode
display.
Number buttons now work for the sound adjustment
2) Adjust the speaker output levels as follows:
To adjust center speaker. press CENTER +/-."
To adjust left rear speaker, press REAR-L +/-.
To adjust right rear speaker-. press REAR-R +/-.
To adjust subwoofer, press SURWOOFER +/-.
To adjust the effect level, press EFFECT.*"
The name for the
ikm
currently adjusted appears on the
display. For detail\. 5ee the illustrations of "Speaker output
levels" on page 24.
l
You can adjust the speaker output /eve/s for the
activated speakers
ONLY (the speaker indicators
are
lit on the display).
* You cannot adjust the output /eve/s of center speaker
when one of DAP modes is activated.
:-'* You can adjust the effect /eve/ on/y when one of DAP
modes is activated.
l
Before operating
the DVD player using remote
control, press DVD to change the remote control
operation mode to DVD.
For usina test tone
I) Press CONTROL
!) Press TEST.
The playback sound stops during playback.
"TEST L" starts flashing
on
the display and a test tone come
out of the speakers in the following order:
~~~~~~~~~~
(Right rear speaker)
I) Adjust the speaker output level as follows:
To adjust center speaker, press CENTER +/-.
To adjust left rear speaker, press REAR*L +/-.
To adjust right rear speaker. press REAR-R +/-
* You cannot adjust the speaker output /eve/s if you have set
speaker information
to "NO."
l
No test tone comes out of the speaker when its speaker
fnformation
is set to "NO."
l
When you press EFFECT or SUBWOOFER
+/-, the test to
stops.
I) Press TEST to stop the test tone.
The test tone stops.
0 When no operation is done, the test tone stops automatical
in about I minute.
Relation between Surround modes and ad&table items
0: Possible
x : Impossible
I
DAP
I
c
I
x
I
c
IO
IO
IO
1
All Channel Stcrco
1
c
[
0
C'
0
0
X
Note:
l
You cannot adjust the speakers
which are not used by the selected Surround mode
28
Advertisement
Table of Contents
