Table of Contents
Advertisement
1. If you have already plugged your VCR, TV, and
this unit into the AC outlets, unplug their AC
power cords first.
2. Connect your VCR, TV, and this unit following
"CONNECTIONS
I 99 on the previous page, using
the cables with the monaural mini-plugs (not
supplied).
3. Connect the audio input/output jacks on VCR,
TV, and this unit using the audio cords.
0 See page\ 7 to 9.
4. Connect the video input/output jacks on VCR,
TV and this unit following "CONNECTIONS
2"
on the previous page, using the composite video
cord, with S-video plug or with component video
plugs.
5. Plug the AC power cords of the components into
the AC outlets.
6. When turning on the TV for the first time after
the AV COMPU LINK connection, turn the TV
volume to the minimum
using the
TV
volume
control on the TV.
7'. Turn on other connected components first, then
turn on this unit.
0 When
tLmng
on
tilt
VCR.
USC the
remote
Colltl-01
SuppIled
with thic unit--pre\\
Oil STANDBY/ON
VCR.
'l-he AV ('OMPU LINK re~notc control \ystem allows you to use the
tivc bait functions listed lbclo\'v.
Remote
Control
of the TV and VCR Using This
Remote
Control
r:or
details.
see page 62.
* Aim the remote control tiil-ectly at the remote sensor on each
target component.
Qne-Touch
Video
Play
Simply bv inxrting
a \,idco C;I\\C~IC \h~thout its sat'ety tab into the
VCR. you can enjoy the v~dco playback without setting other
switches manually. The unit ;~utom;lticully turn\ on and changes the
source to VCR.
The TV automatically turn\ on and change\ the input mode to the
appqriate
position so that you can L icw the playback picture.
When you insert a \~ideo ca\sc~tc \h ith its safety tab, press the play
(F) button on the VCR or on the rcmotc control. You can get the
same result.
One-Touch
DVD Play
Sunply by starting playback on the built-in DVD player, you can
enjoy the playback without setting other switches manually.
The TV automatically turns on and changes the input mode to the
appropriate position so that you can view the playback picture.
Automatic
Selection
of TV's Input
Mode
0 When you select TV as the source to play on the unit, the TV
automatically changes the input mode to the TV tuner so that you
can watch TV.
0 When you select DVD, VCR, or DBS as the source to play on the
unit. the TV automatically changes the input mode to the
appropriate position so that you can view the playback picture.
Notes:
When connecting
a TV with the AV COMPU LINK EX terminal to
ttx
unit, you cannot use a component
video cable (as CASE 3 on
the previous page).
When you select TV as the source on the unit, you cannot see the
menu on the TV screen since the AV COMPU LlNK remote control
system automatically
changes the TV's input mode to the TV tuner.
If you do not mind stopping listening to the TV sounds, you can
then show the on-screen
menu after changing
the TV's input mode
to the appropriate
position the unit is connected
to.
Automatic
Power
On/Off
The TV and VCR turn on and off along with the unit.
When you turn on the unit;
* It'the previously selected source is VCR, the TV and VCR will
turn on automatically.
- If the previously sclcctcd source is TV or DVD, only the TV will
turn on automatically.
When you turn off the unit, the TV and VCR will turn off.
Note:
a If you turn off the unit while recording
on the VCR, the VCR will not
turn off but continue recording.
60
Advertisement
Table of Contents
