Table of Contents
Advertisement
n
To change
the transmittable
signals
for
operating
other
manufacturers'
DBS tuner
1. Press and hold
O/r STANDBY/ON
DBS.
2. Press DBS.
3. Enter the manufacturer's
code
using the number buttons
(l-9,0).
See to the right to lind the code.
4. Release O/I STANDBY/ON
DBS.
O/l STANDBY/ON
DBS
: Turns on o!- off the DBS tuner.
After pressing DBS. you can perform
the following
operations
on a DBS tuner:
TV/DBS CH
+ or - : Changes the channels.
1 - 9,0,100+
: Selects the channels.
For channel number 5. press 5.
lwr ~hanncl number
IO, press I. then 0.
For channel number 23, press 2. then 3.
For channel
number
135. press lOO+. 3.
hen 5.
Note:
TV RETIJRN
will function
as the
EUTER
button it' your equipment
require< pressing ENTER
after selecting
a
ch~~nncl nulnber.
* Refer a/so fo the manuai suppiled for your DBS tuner.
5. Try to operate your DBS tuner by pressing
WI STANDBY/ON
DBS.
When your DBS tunel. turn\ on or oil'. you have rntercd
the
correct code.
If there are more than one code listed for your brand of DlSS
tuner, try each one
until the col-l.cct one i\ entered.
Manufactures'
c :odes for DBS tuner
'"57"
i\ the initial JVC code.
Note:
* Manufacturers'codes
are subject to change without notice. If
they are changed,
this remote control cannot operate the
equipment.
64
Advertisement
Table of Contents
