Disassembly; The Scooter Disassembled; Tiller Lock Knob (Locked); Tiller Lock Knob (Unlocked) - Pride Mobility Celebrity X Owner's Manual

V I I I . D I S A S S E M B L Y

DISASSEMBLY

You can disassemble the scooter into seven pieces: the
seat, the front section, the rear section, the rear shroud,
the basket and the batteries. See figure 18. No tools are
required to disassemble or assemble your scooter, but
keep in mind that the disassembled sections of the
scooter take up more floor space than the assembled
unit. Always disassemble or assemble your scooter on a
level, dry surface with sufficient room for you to work
and move around your scooter-about 2 metres (5 feet)
in all directions. Remember that some scooter
components are heavy and you may need assistance
when lifting them.
WARNING! Lifting weight beyond
your physical capability may result
i n p e r s o n a l
assistance when necessary while
disassembling or assembling your
scooter.
1. Place the scooter in drive mode by engaging the freewheel lever.
2. Lock the tiller in the straight ahead position by pushing the tiller lock knob in and turning it clockwise 90°. See
figure 19. The front wheel must face forward in order to lock the tiller.
3. Remove the seat by lifting it straight up and off of the scooter. If you encounter resistance when removing the
seat, disengage the seat rotation lever and swivel the seat back and forth while lifting up on the seat.
LOCKED
POSITION
Figure 19. Tiller Lock Knob (Locked)
Celebrity X
i n j u r y. A s k fo r
www.pridemobility.com
A N D A S S E M B L Y
REAR SECTION BASKET
REAR SHROUD
FRONT SECTION
Figure 18. The Scooter Disassembled
UNLOCKED
POSITION
Figure 19A. Tiller Lock Knob (Unlocked)
SEAT
BATTERIES
33