V I I .
ARMREST WIDTH ADJUSTMENT
The armrest width can be adjusted inward or outward.
1. Loosen the armrest adjustment knobs. See figure
16.
2. Remove the detent pins.
3. Slide the armrests in or out to the desired width.
4. Align the adjustment holes on the seat frame and
armrest, then reinsert the detent pins.
5. Tighten the armrest adjustment knobs as required.
NOTE: Pivot the armrests upward to aid in get-
ting onto and off of your scooter.
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to different heights. See
figure 17.
1. Remove the seat and shroud from your scooter.
See IX. "Disassembly and Assembly."
2. Remove the seat height adjustment bot.
3. Loosen the clamp-action bolt.
4. Raise or lower the upper seat post to the desired
seat height.
5. While holding the upper seat post at that height,
match up the locating holes in the upper seat post
with those of the lower seat post.
6. Insert the seat height adjustment bolt through the
locating holes of both the upper and lower seat
posts.
7. Reinstall the nut onto the seat height adjustment bolt
and tighten
8. Tighten the clamp-action bolt
9. Reinstall the rear shroud and the seat.
Celebrity X
C O M F O R T
www.pridemobility.com
A D J U S T M E N T S
ARMREST ADJUSTMENT KNOBS
DETENT PINS
Figure 16. Armrest Width Adjustment
NUT
NUT
Figure 17. Seat Height Adjustment
UPPER SEAT
POST
LOCATING
HOLES
SEAT HEIGHT
ADJUSTMENT
BOLT
CLAMP-ACTION
BOLT
LOWER SEAT POST
31