Disassembly And Assembly - Pride Mobility Legend Classic 3-Wheel Scooter Owner's Manual

V I I I . D I S A S S E M B L Y A N D A S S E M B L Y
DISASSEMBLY
You can disassemble the scooter into seven pieces: the seat, the front section, the rear section, the rear shroud, the
basket, and the batteries. See figure 12. Place the scooter in an area where you have sufficient clearance to move
the parts around. You need about (2 meters) four or five feet in all directions. You may need assistance to lift some
of the scooter components. See III. “Specifications” for individual component weights.
REAR SECTION
No tools are required to disassemble or assemble your scooter. Always disassemble or assemble your scooter on
a level, dry surface with sufficient room for you to work and move around your scooter. Keep in mind that the
disassembled sections of the scooter take up more floor space than the assembled scooter.
WARNING! Lifting weight beyond your physical capability may result in personal injury. Ask for
assistance when necessary while disassembling or assembling your scooter.
1. Place the manual freewheel lever in the drive (down) position.
2. Coil the charger power lead and store it for future use.
3. Push forward on the seat lock lever to unlock the seat; lift the seat up and off the scooter. See figure 13.
4. Gently pull the shroud up from the frame and lift it off of the scooter. See figure 14.
5. Disconnect the battery strap.
FIGURE 13. REMOVING THE SEAT
Legend Classic/Rev D/August 03
REAR SHROUD
FIGURE 12. THE LEGEND CLASSIC DISASSEMBLED
PULL SHROUD AWAY
FROM FRAME HERE
BEFORE LIFTING
SHROUD UP
FRONT SECTION
FIGURE 14. REMOVING THE REAR SHROUD
www.pridemobility.com
SEAT
BATTERIES
BASKET
29