Rttt Avoidance And Other Channel Use Restrictions; Ghz Specific Frequency Planning Considerations; Figure 13 - 5.8 Ghz Uk Rttt Channel Avoidance; Figure 14 - 5.4 Ghz Available Spectrum Settings - Motorola PTP 600 Series User Manual

Point-to-point wireless bridges
Hide thumbs Also See for PTP 600 Series:
Table of Contents

Advertisement

5.3.2

RTTT Avoidance and Other Channel Use Restrictions

Where regulatory restrictions apply to certain channels these channels are barred. The user
should note that the number of channels barred is dependant on the channel raster selected.
For example see the effect of the UK RTTT channel restrictions in Figure 13. Barred channels
are indicated by a "No Entry" symbol displayed on the "Spectrum Management" web page,
see section 8.3.9 "Spectrum Management Control - With Operational Restrictions".
Band Edge
5725 MHz
5740 MHz
5742 MHz
5744 MHz
5746 MHz
5748 MHz
Lower Centre
Frequency
5.4

5.4GHz Specific Frequency Planning Considerations

Adjustment of the lower center frequency allows the operator to slide the available frequency
settings up and down the 5.4 GHz band. See Figure 14.
5740 5750 5760 5770 5780 5790 5800 5810 5820 5830
5742 5752 5762 5772 5782 5792 5802 5812 5822 5832
5744 5754 5764 5774 5784 5794 5804 5814 5824 5834
5746 5756 5766 5776 5786 5796 5806 5816 5826
5748 5758 5768 5778 5788 5798 5808 5818 5828
Available Frequency Settings (M Hz)

Figure 13 - 5.8 GHz UK RTTT Channel Avoidance

Figure 14 - 5.4 GHz Available Spectrum Settings

42
Band Edge
5850 MHz
Default

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Motowi 4 ptp 600 series

Table of Contents