Wireless 5.4Ghz Variant - Motorola PTP 600 Series User Manual

Point-to-point wireless bridges
Hide thumbs Also See for PTP 600 Series:
Table of Contents

Advertisement

21.1.2 Wireless 5.4GHz Variant

Radio Technology
RF Band
Channel Selection
Dynamic Frequency
Control
Channel size
Tx power @ Antenna ports
Transmit Power Control
Manual Power Control
Receiver Noise Figure
27
As specified by FCC Part 15.407 and ETSI EN 301893
Specification
5.470-5.725GHz
By dynamic frequency control and manual intervention
Automatic detection on start-up and continual adaptation to
avoid interference.
Initial capture 10-15 sec. Out of service on interference 100
ms. (+60 seconds when Radar Detection is operational)
11 MHz
Mode
BPSK Mode
QPSK Modes
16QAM Modes
64QAM Modes
Loop bandwidth 1 Hz, Range 30dB typical
Maximum power can be controlled lower than the power
limits shown above in order to control interference to other
users of the band.
Typically 6 dB
234
Maximum Power Output
27
(region dependant)
25 dBm
23 dBm
21 dBm
19 dBm

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Motowi 4 ptp 600 series

Table of Contents