7.7
Connecting Up
7.7.1
Preparing The PIDU Plus To ODU Cable
Note: The maximum cable length between the ODU and the user's Network Equipment is
100m (330 ft). Cable lengths up to 300m (984 ft) can be used where the PIDU Plus to ODU
cable is supplying power only, i.e., when using the PTP 600 Series Bridge Optical Interface.
The cable should be assembled to the following instructions:
Step 1: Assemble gland on cable as shown
Step 3: Arrange conductors as shown in
Figure 19 and cut to length
Figure 19 - Completed ODU connector
54
Step 2: Strip the outer insulation
Step 4: Insert conductors and crimp