Upgrade Software Image; Figure 82 - Software Download Progress Indicator Page - Motorola PTP 600 Series User Manual

Erase Configuration: This allows the user to erase the unit's entire configuration. Executing
this option will also erase factory settings such as target MAC address, range setting, license
key, etc.
Reboot: This allows the user to reboot the unit. This option must be executed after resetting
the IP & Ethernet configuration or erasing the configuration detailed above.
Software Version: This is the software version of the recovery operating system permanently
installed during manufacture.
Recovery Reason: Indicates the reason the unit is operating in Recovery mode. Possible
reasons are "Recovery button active" or "Invalid or corrupt image"
MAC Address: The MAC address shown here is the MAC address of the unit programmed
during manufacture.
9.1

Upgrade Software Image

The first step (Figure 81) is to use the 'Browse' button to locate the software image to be
downloaded. Once located the user should press the "Upgrade Software Image" button to
start the software download process.
During software download, progress is indicated by a pair of progress bars (Figure 82).

Figure 82 - Software Download Progress Indicator Page

147