Wireless Configuration; Figure 48 - Installation Wizard Wireless Configuration - Motorola PTP 600 Series User Manual

Telecoms Channel Selection: This controls the selection of the telecoms interface standard
supported options or T1 and E1.
Channel A Line Code: The line code setting of the telecoms interface. This must match the
setting of the device connected to this interface.
Channel B Line Code: The line code setting of the telecoms interface. This must match the
setting of the device connected to this interface.
Cable Length: This field is applicable to the T1 operating mode only. It configures the T1
transceiver to output a signal suitable for driving a cable of the specified length. This should
be set to reflect the length of cable between the wireless unit and the connected equipment.
8.3.4.4

Wireless Configuration

Step 2 of the installation wizard requires the installer to enter the wireless configuration
parameters.

Figure 48 - Installation Wizard Wireless Configuration

106