Configuring Link Encryption; License Keys; Figure 134 - Software License Key Data Entry - Motorola PTP 600 Series User Manual

Option 1 allows the user to encrypt all traffic sent over the wireless link using 128-bit
encryption. Option 2 allows the user to encrypt traffic using either 128 or 256-bit encryption.
The configuration process for both encryption variants is identical except for the selection of
algorithm. The following configuration example is for a 256-bit encryption key.

16.1 Configuring Link Encryption

After purchasing AES encryption for the PTP 600 Series wireless link, two new license keys
will be issued, one for each end of the wireless link. The following configuration process gives
a step by step guide to enabling AES link encryption on a PTP 600 Series bridge.

16.1.1 License Keys

The first step when configuring link encryption is to enter the new license keys in both 600
Series wireless units.

Figure 134 - Software License Key Data Entry

214