Controlling Relays (Not For Hipath 2000) - Siemens HiPath 500 Operating Instructions Manual

Step by Step
Controlling Relays
(Not for HiPath 2000)
If this feature is configured (contact the service person-
nel), you can also control relays
HiPath 3000 communications platforms.
n
Lift the handset.
Enter the code.
o
Enter the (DISA) call number of the HiPath 3000 in
which the relay is to be controlled.
Enter
o
Enter the (DISA) call number of the telephone from
which you wish to control the relay.
Enter
or Enter the code for "on" or "off".
w
... Enter the relay.
Special Functions in the LAN (Not for HiPath 500)
Page 40 in other
51