Transferring A Call; After A Speaker Call (Announcement) In A Group - Siemens HiPath 500 Operating Instructions Manual

Calling Multiple Parties Simultaneously
Step by Step
20
Removing the ISDN Central Office Party
From the Conference (Only for U.S., Not for
HiPath 500)
Enter the code.

Transferring a Call

If the person you are speaking to wants to talk to anoth-
er colleague of yours, you can transfer the call that col-
league.
Press the key.
o
Enter the number of the party to which you want to
transfer the call.
s
Announce the call, if necessary.
t
Replace the handset.
...After a Speaker Call (Announcement) in a
Group
If this function has been configured (contact the service
personnel), you can use a speaker call (announcement,
Page 14) to announce a call in progress to a group of
users Page 44.
After a member of the group has accepted the call
request, you can transfer the waiting party.
Precondition: You are conducting a call.
Enter the code.
o w
Enter the group's station number.
s
Announce the call.
When a member of the group accepts the call, you are
connected to this party.
t
Replace the handset.
If the connection between the two other parties
is not established within 45 seconds, the call
from the first part returns to you (recall).