Locking Another Telephone To Prevent Unauthorized Use; Using System Functions From The Outside (Disa: Direct Inward System Access) - Siemens HiPath 500 Operating Instructions Manual

Step by Step
Locking Another Telephone to Prevent
Unauthorized Use
If this function has been configured (contact the service
personnel), you can lock other telephones to prevent
unauthorized use, and later unlock them again.
You can use this function to unlock the telephone for
users who have locked their telephones and then
forgotten their PINs.
n
Lift the handset.
Enter the code.
o
Enter the internal number of the telephone that you
want to lock or unlock.
Enter the code for "Changeover on".
or
Enter the code for "Changeover off".
Using System Functions from the Out-
side
(DISA: Direct Inward System Access)
If this function has been configured (contact the service
personnel), you can set up external outgoing calls from
outside the system, just like an internal user. You can
also activate and deactivate the following functions in
your system:
• Reset services and functions,
code: #0
• Call forwarding, code:
• Lock and unlock phone,
code: 66/#66
*
• Save PIN,
code: 93
*
• Send a message,
code: 68/#68
*
• Group ringing, code:
• Group call, code:
• Suppress caller ID,
code: 86/#86
*
• Open door, code:
• Door opener on/off, code:
• Control relay, code
Page 33
1/#1
*
Page 26
Page 27
Page 32
81/#81
*
85/#85 Page 44
*
Page 14
61 Page 12
*
89/#89
*
90/#90
*
Using Other Functions
Page 29
Page 45
Page 13
Page 40
37