Turning The Call Waiting Tone On And Off; Accepting A Specific Call For Your Colleague; Using Mailboxes; Using Timed Reminders - Siemens HiPath 500 Operating Instructions Manual

Step by Step
or

Turning the Call Waiting Tone On and Off

You can suppress the call waiting tone (approx. every
six seconds) for external calls. A one-time special dial
tone then alerts you to the waiting call.
n
Lift the handset.
w
Enter code for "tone off" or "tone on".
Accepting a Specific Call for Your Col-
league
You hear another telephone ring.
n
Lift the handset.
Enter the code.
o
Enter the number of the telephone that is ringing.
Accepting calls in a team

Using Mailboxes

If there are messages waiting for you, you will hear a
special dial tone (continuous buzzing) when you lift the
handset.
n w
Lift the handset.
Enter the code.
This connects you to the sender of the message or the
mailbox system.

Using Timed Reminders

Precondition: You must have saved a timed reminder
Page 28. The current time is the time stored.
n t
Your telephone rings.
Lift the handset and replace it again.
If you fail to answer the timed reminder, it
repeats five times and is then erased.
Making and Answering Calls
Page 45.
11