Recording Calls - Siemens HiPath 500 Operating Instructions Manual

Using Other Functions
Step by Step
if applicable
34

Recording Calls

If configured (contact the service personnel), you can
record calls.
Precondition: You are conducting a call.
Enter the code.
An announcement notifies you and the person you are
speaking with that recording has begun. A beep will
also sound every 15 seconds until recording has con-
cluded.
While a call is being recorded, a third party can-
not be added to the call.
Ending Recording
Press the Consultation/Flash key twice.
or
t
Replace the handset.
n
You receive a recall. Lift the receiver to continue the call
without activating call recording.
Playback
The steps required for playing back a recording depend
on the voice memory system (see the corresponding
Operating Manual or Page 11).