Satdock 9555 Usage - Beam iridium SatDOCK 9555 Installation & User Manual

SatDOCK 9555
Usage
CAUTION:
Ensure that the external antenna grommet at the rear of the
9555 handset is removed prior to inserting the handset into the
SatDOCK cradle.
1. To dock the 9555 handset place the base of the 9555 handset
into the seat if the SatDOCK ensuring that the pins on the bottom
of the 9555 handset line up with that on the seat of the Sat DOCK
cradle as illustrated below.
2. Push the top face of the handset to seat the handset base firmly
into the SatDOCK cradle until the handset clicks and locks into
place at the top of phone. Gently pull on the handset to confirm
that it is docked correctly and won't come loose.
3. When removing the 9555 handset from the SatDOCK cradle,
reverse the above steps, ensuring you firmly press the "eject"
button on top of the SatDOCK cradle. The phone will then pop
forward into your hand and can then be removed from the cradle.
( the "eject" button requires firm force to disengage phone)
1. Place 9555 on
the base of the
cradle
WARNING:
The SatDOCK requires that the 9555 is running firmware
revision 9007 or greater. To check which version of firmware
is operating in the 9555, undertake the following on the 9555
handset:
1. Press MENU
2. Navigate to SETUP and press OK
3. Navigate to PHONE INFORMATION and press OK
Ensure that the 9555 reports F/w:HT09007 (or greater)
If the 9555 is running firmware earlier than 9007 please visit
h t t p : / / w w w. b e a m c o m m u n i c a t i o n s . c o m / 9 5 5 5 u p g r a d e
for information on how to upgrade the 9555.
SatDOCK 9555 Installation & User Manual
2. Push 9555
phone into cra-
dle until it clicks
to lock position
3. Firmly press
'Eject' button to
release phone
from the cradle.
25