Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Beam IsatDock2 MARINE
Summary of Contents for Beam IsatDock2 MARINE
- Page 1 IsatDock2 MARINE Inmarsat Approved User Manual...
-
Page 3: Beam Isatdock2 Marine Part Number
Information furnished by Beam Communications Pty Ltd (Beam) is believed to be accurate and reliable. However, no responsibility is assumed by Beam for its use, or for any infringement of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Beam. -
Page 4: About Beam Communications
Inmarsat Satellite Network. Beam’s commitment to be at the forefront has continued to increase its share of the global satellite communications market. Its premium distribution Beam Communications Pty Ltd network spans the world. -
Page 5: Conventions In This Manual
The Inmarsat IsatPhone 2 handset ® The ® symbol, mark and logos are owned by the respective companies of which the symbol follows. Any use of such marks by Beam Communications is under license. Other trademarks and trade names Note/Important/Tip Header are those of their respective owners. -
Page 6: Package Contents
Package Contents Optional Accessories Additional Information Check that your IsatDock2 MARINE package The following optional accessories are available For the latest in supporting software and contains all of the following items: for your IsatDock2 MARINE documentation for the IsatDock2 please go to www.beamcommunications.com/support/... -
Page 7: Table Of Contents
Guidelines for Electrical Connections Other Resources Available Online Beam Warranty Terms & Conditions Safety Information Installation Procedure Safety Transceiver IsatPhone 2 Installing the IsatDock2 MARINE Cradle IsatDock2 FCC Information IsatDock2 MARINE Usage Electronic Devices Operation of the IsatPhone 2 Pacemakers... -
Page 8: Safety Information
Safety Extra Low » areas where fuel odors are present (for The IsatDock2 MARINE is a low power docking Voltage (SELV) requirements of IEC60950. example, if a gas/propane leak occurs in a station for the IsatPhone 2 handset. When ON, car or home);... -
Page 9: Safety Transceiver Isatphone 2
This antenna » National Radiological Protection Board of is securely mounted in a holder for speakerphone transmits RF energy. The Beam antenna the United Kingdom, GS 11, 1988 operation. Before making a call with a handheld (fitted via an extension coaxial cable to the »... -
Page 10: Isatdock2 Fcc Information
WARNING one or more of the following measures: Changes or modifications not expressly • Reorient or relocate the receiving antenna approved by Beam Communications could void • Increase the separation between the the product warranty. equipment and receiver •... -
Page 11: Electronic Devices
Should ALWAYS keep the phone more than six inches from their pacemaker when phone is turned ON. • Should turn the phone OFF immediately if you have any reason to suspect interference is taking place. IsatDock2 MARINE - User Manual... -
Page 12: Isatdock2 Marine Key Features
• Wall or desk mounting bracket • In-call mute • Cable routing LEFT/TOP/BOTTOM • Ringer volume UP/DOWN IsatDock2 MARINE is an intelligent docking • Integrated antenna connection (GPS/GSPS) • In-call volume UP/DOWN • Easy access to Assistance & Track buttons •... -
Page 13: Personal Alert/Assistance Alert
NOTE Entering the firmware upgrade mode will be capabilities for various land and sea based If the Beam Alert Loop is going to be used accompanied by a long beep followed by three applications. with an external button, remember to enable short beeps. -
Page 14: Equipment Overview
IsatPhone 2 (not included) 10. Function Buttons 11. Status Indication LED 12. Back Panel Connectors a. USB Data Interface b. Beam Alert Loop connection c. RJ11/POTS interface d. DC power and accessory input e. RJ9 Privacy handset 13. IsatDock2 Adapter... -
Page 15: Handset
An audible ‘click’ is heard when the phone is in the docked position. IMPORTANT: Before docking the IsatPhone 2 to the docking station, check that the USB/Audio adapter has been connected to the IsatPhone 2. IsatDock2 MARINE - User Manual... -
Page 16: Installation Guidelines
This guide outlines the process for installing • Route cables so they are protected from electrical radio system operation. The the IsatDock2 MARINE in conjunction with an pinching, sharp edges, and crushing. ignition system is the most common Inmarsat IsatPhone 2 handset and antenna. -
Page 17: Installation Procedure
Installation Procedure 1) Beam Antenna Connection Anntena Connection Diagram Installing the IsatDock2 MARINE To connect the IsatDock2 MARINE to the GSPS Beam Cradle Antenna, requires the use of certified satellite and GPS Install the components in the following order. antenna cables. These cables are purpose built cables... - Page 18 DO NOT pull with force on the cables from the rear docking station is mounted securely. of the IsatDock2 MARINE. Please install strain relief clamping for the antenna cables where required. Correct installation of the antenna system is a vital...
- Page 19 2b) Desk Mounting Orientation The Security Bolt Security bolt ensures the MARINE docking unit is The IsatDock2 MARINE supports a desk firmly fixed to the wall and prevents the docking mount configuration. Depending on the users station from sliding back up freeing the dock.
- Page 20 (1) Springless Cup for Normal light-use Desk mounted cradle position. The Privacy Handset is conveniently mounted on to the IsatDock2 MARINE enclosure, The ‘springless’ cup is fitted to the docking station providing a local handset function. with the mounting clip in a ‘flush’ position.
- Page 21 4) Access to Rear Connector Bay (2) Spring Cup - Heavy duty use cup In harsh environments, the Privacy handset is For the IsatDock2 MARINE, the external cable actively retained in the mounting cup. This is interfaces are at the rear of the docking station.
- Page 22 NOTE: ISD951 AC Plug Pack Installation If the Beam Alert Loop is going to be used with an external button, remember to enable this external 6) Connecting the Beam Alert Loop loop in the Falcon settings. Once enabled, the loop...
- Page 23 If a call is in progress while this as the vessel key is enabled or disabled. If occurs, the IsatDock2 MARINE will stay on for 20 this function is not required, the YELLOW minutes after the call is terminated. Please follow wire MUST be connected to the RED wire.
- Page 24 • Rear Cover Screwed in Place. The rear cover Right angled adapters can be fitted to the The IsatDock2 MARINE has an ingress Protection of the MARINE dock must be screwed down antenna connectors to allow routing of cables rating of 54. When installing the IsatDock it is with at least the four screws indicated below through a wall.
-
Page 25: Isatdock2 Marine Usage
IsatDock2 MARINE Usage MARINE Cover The IsatDock2 MARINE docking station achieves Operation of the IsatPhone 2 Prepare an IP54 rating over the handset by the use of a NOTE: hinged cover . The cover is released by the latch (1) If the IsatPhone 2 is removed from the dock the Inmarsat IsatPhone 2 at the base of the cover. -
Page 26: Placing Voice Calls
Lift the RJ11/POTS phone handset Mobile Originating the IsatPhone 2 handset. “OFFHOOK” to answer the call. By default the IsatDock2 MARINE will start Once the call is in progress, the same options all calls in speakerphone mode when are available as described in “Speakerphone dialing on the keypad if RJ11 and privacy Phone Call –... -
Page 27: Mute Mode
During a call, Press the Mute button on the Once the call is connected, the STATUS LED front of the IsatDock2 MARINE, a RED LED will flash to indicate a call is in progress. will illuminate the Mute button to confirm Press the RED key on the IsatPhone 2 that the uplink audio is muted. -
Page 28: Personal Alert And Assistance Alert Operations
Please refer to the Inmarsat IsatPhone 2 User If the Beam Alert Loop is going to be used conditions must be fulfilled for a docked Manual to configure the Personal Alert and with an external button, remember to enable handset. -
Page 29: Isatdock2 Marine Front Panel
Answer inbound call in speakerphone mode * This action is optional, only when the Personal Alert Mode for your IsatPhone 2 is configured. A beep will only sound if audible alerts are enabled in the Falcon IsatDock2 MARINE - User Manual... -
Page 30: Isatdock2 Marine Buttons/Led Lights
IsatDock2 MARINE Buttons/LED lights MUTE BUTTON GREEN YELLOW WHITE/OFF Outgoing audio is Outgoing audio is ILLUMINATED muted not muted POTS/RJ11 in use FLASHING GREEN YELLOW WHITE/OFF STATUS LED Handset registed and Handset not ILLUMINATED able to make a call registered/no signal... -
Page 31: Assuring Quality Of Service
This problem is more evident when result in degraded performance and may damage wind and smoke. numerous antennas and broadcasting devices the IsatDock2 MARINE. This will void the product are located within close proximity to each other. warranty. Symptoms of RF interference... -
Page 32: Specification Summary
GPS Antenna SMA-Female ISD960 - IsatDock2 Adapter @ 12v 10-32V DC 4-way microFit RST060 - Beam GoalZERO UPS Battery Pack Power w/o IsatPhone 2 130mA 1.6W (AC/DC adapter, or DC lead) RST410 - “Man Down Pendant” Kit Standby + Charging 360mA 4.3W... - Page 33 (1) Physical Dimensions - ISD2 MARINE Dock (2) Physical Dimensions - Wall Bracket 47.16mm 51.0mm 60.0mm Ø 5.2mm 69.0mm 69.0mm IsatDock2 MARINE - User Manual...
-
Page 34: Trouble Shooting
RED) will change to GREEN when the handset Beam certified antenna cabling is being Check the signal strength on the handset. is registered and able to make calls on the used and there are no sharp bends or cuts Ensure the Headset connector at the base network. -
Page 35: Beam Warranty Terms & Conditions
Man down Kit, RST970, 9522B and 9602) also come Information in our descriptive literature is based exclusive remedy and the limit of Beam’s liability for any loss with a 12 month warranty. Beam Communications on product specifications that are current at the... - Page 36 BEAM Communications GLOBAL HEAD OFFICE Tel: +61 3 8588 4500 Fax: +61 3 9560 9055 AMERICAS Tel: +1 800 250 5819 (USA toll free) Fax: +1 888 972 8037 EUROPE Tel: +44 208 144 1405 Fax: +44 208 289 3542 Info: info@beamcommunications.com...
Need help?
Do you have a question about the IsatDock2 MARINE and is the answer not in the manual?
Questions and answers