Beam iridium IntelliDOCK 9555 Quick Start Manual

4. Options
Privacy Handset:
1. The Privacy Handset Kit is ordered separately.
2. Mount the handset cup to the mounting plate.
3. Mount the spacer plate and the mounting bracket, by using the longer
screws provided with the kit. (Re-installed the RAM arm-bracket behind
these plates).
4. Connect the Privacy Handset 3.5mm plug into the rear cable jack.
5. Privacy Handset mode is active whenever the handset is removed from the
cup.
Earpiece-Jack Mode:
Use a 2.5mm earpiece plugged into the right side of the 9555 handset.
1. During a Bluetooth call, to enable Earpiece-Jack Mode, press and hold the
Mute button for 1.5 seconds. The LED flashes Orange.
2. To exit Earpiece-Jack Mode and revert to Bluetooth , press the Mute button
once.
5. Add Bluetooth Device
AUDIO: To configure (pair) to a Bluetooth® headset device:
1. Discovery Mode: Press and hold for 5 secs the Bluetooth® button on
the cradle The LED flashes Blue and Orange .
2. Hold the Headset device button(s) to enter pairing mode.
3. Once paired, the Bluetooth® LED is Blue (half intensity).
4. Bluetooth® can be turned ON with a single press, and OFF by press for
2 secs the Bluetooth® button on the cradle.
DATA: To configure (pair) to a Bluetooth® serial data device:
1. Turn OFF any other Bluetooth Audio or Data devices in range nearby.
2. Discovery Mode: Press and hold for 5 secs the Bluetooth® button on
the cradle The LED flashes Blue and Orange .
3. Put the data-device / computer into Discovery mode.
4. Once paired, the Bluetooth® LED will start slow flashing Blue.
6. Using IntelliDOCK 9555
• After applying power to AC power adaptor or turning key/Acc on, the
IntelliDOCK will beep upon power up
• Wait for phone to power up and register
PANEL BUTTONS AND INDICATORS:
LOCATION
Out of Call:
Toggle Ringer Mode
During In-Call Bluetooth:
Mute (single press)
During In-Call Bluetooth:
Earpiece-jack
(1.5 seconds press)
Subsequent single press,
exits Earpiece-jack
Bluetooth® On
(single press)
Bluetooth® OFF
(1.5 seconds press)
Discovery Mode
(5 seconds press)
Clear Bluetooth® Devices
(10 seconds press)
(optional)
BUTTON MODE LED/SOUND
LED off.
Ringer choice sounds as preview.
LED is RED when MUTE.
LED flashes ORANGE.
LED is BLUE (half intensity) when
Bluetooth® ON and is paired. Fast
flashing when searching device. Slow
flashing during a call.
Single beep sounds when turning OFF.
LED flashes ORANGE and BLUE.
Ringer sounds double (2) beeps.
Ringer sounds triple (3) beeps.
www.beamcommunications.com
info@beamcommunications.com
TEL: +61 3 8588 4500
FAX: +61 3 9560 9055

QUICK START GUIDE

iridium IntelliDOCK 9555
Suitable for the Iridium 9555
Portable Satellite Telephone
Beam Communications Pty Ltd
BLUETOOTH
USB DATA
RINGER
MUTE
PRIVACY HANDSET
CHARGER