Related Manuals for Beam iridium SatDOCK-G 9555
Summary of Contents for Beam iridium SatDOCK-G 9555
- Page 1 SatDOCK-G 9555 with built in GPS Installation & User Manual Suitable for the Iridium 9555 Portable Satellite Telephone Beam Communications Pty Ltd...
-
Page 2: Beam Communications
However, no responsibility is assumed customized solutions. Beam develops innovative products and by BEAM for its use, or for any infringement of patents or other rights services to meet market demands and niche applications. -
Page 3: Conventions In This Manual
Global Positioning System DATA Hands-free Digital Peripheral Line To use data on the SatDOCK-G 9555 the specific Beam USB driver must be downloaded from the above link and Short Message Service installed on the PC connecting to the SatDOCK-G 9555. -
Page 4: Table Of Contents
Electrical & Environmental Specifications Cradle Mounting Dimensions SatDOCK-G 9555 Dimensions in millimeters SatDOCK-G 9555 Usage Trouble Shooting Docking & undocking your 9555 handset Removing the 9555 from vehicle For additional product support: Preliminary Testing Beam Warranty Conditions Prepare the Iridium 9555 Handset... -
Page 5: Additional Information
Please read the following information carefully before • Turn your phone OFF and DO NOT remove your battery installing and using the Beam SatDOCK-G 9555. Failing or remove the 9555 handset from the cradle when you to follow instructions may compromise the safety of are in any area with a potentially explosive atmosphere. -
Page 6: Electronic Devices
SatDOCK-G 9555 Installation & User Manual These standards are based on extensive scientific review Persons with pacemakers: by scientists, engineers, and physicians from universities, ◊ Should ALWAYS keep the phone more than six inches government health agencies, and industry groups. They from their pacemaker when phone is turned ON review the available body of research to develop ANSI standard. -
Page 7: About This Equipment
Supports all Iridium voice, data, SMS & SBD services sensing. PRIVACY HANDSET • Supports optional Beam privacy handset Once activated, alert messages will be sent to the preset • Auto sensing answer/hang-up intelligence destination continuously until the alert is disabled either •... -
Page 8: Equipment Overview
SatDOCK-G 9555 Installation & User Manual Installation Guidelines Equipment Overview: This guide outlines the process for installing the Beam EJECT Button SatDOCK-G 9555 in conjunction with an Iridium 9555 portable handset. This kit must not be used with any other device other than the Iridium 9555 handset. -
Page 9: Guidelines For Electrical Connections
SatDOCK-G 9555 Installation & User Manual ◊ In a vehicle equipped with electronically controlled Installation Procedure anti-skid brakes, route all cables on the opposite side of Installing the SatDOCK-G 9555 Cradle the vehicle from the braking modulator box to minimize possible interference from the phone. -
Page 10: Cradle Mounting
SatDOCK-G 9555 Installation & User Manual 1) Cradle Mounting 2a) Install the Iridium Antenna Connection The SatDOCK-G 9555 is supplied with a universal RAM® mount The antenna connections exit bracket that enables mounting to any flat surface (vertical or from the rear of the SatDOCK-G horizontal) within a vehicle, attached on a wall or on a table as 9555 cradle, via the antenna required. -
Page 11: External Speaker And Microphone
The SatDOCK-G 9555 provides a 4-pole 3.5mm audio socket The antenna should only be connected and disconnected on the rear cable loom, for connection to the Beam privacy to the GPS receiver when the SatDOCK-G 9555 is not handset. This provides a local handset function, conveniently powered. -
Page 12: Connect Power
1A fuse between them. The accessory wire installed up to 30 meters (using a enables the SatDOCK-G 9555 to turn on and off as the certified Beam extension cable) vehicle key is enabled or disabled. If this function is not away from the SatDOCK-G cradle. -
Page 13: Bluetooth® Configuration (Optional)
NOTE: from the cradle. (The If the Beam alarm loop is going to be used with an external “EJECT” button requires button, remember to enable this external loop in the SDMS firm force to release the settings. -
Page 14: Preliminary Testing
SatDOCK-G 9555 Installation & User Manual Preliminary Testing NOTE: If the 9555 handset fails to connect with the cradle, the Prepare the Iridium 9555 Handset cradle will power cycle the 9555 twice when it is docked and after that, it will power down the 9555 and put it into a Ensure that the 9555 Handset is running with the required one-minute charge mode with the Ring/Mute LED flashing compatible firmware which can be located at:... -
Page 15: Placing Voice Calls
SatDOCK-G 9555 Installation & User Manual Placing Voice Calls NOTE: Hands-Free Phone Call – Mobile Originating The SatDOCK-G 9555 internal ringer will also sound during an incoming call. This can be changed by a single Dial the number (using the full country codes) on the 9555 handset keypad whilst docked, or the Intelligent handset keypad (if connected). -
Page 16: Privacy Handset Use
SatDOCK-G 9555 Installation & User Manual Privacy Handset Use During call, you may transfer the call to the optional Bluetooth® audio headset (if connected) by a single short press of the Bluetooth® button on the cradle. This NOTE: automatically directs the call audio to the Bluetooth® Any time there is reference to the Ringer/Mute button or the device. The Bluetooth LED will start slow-flashing in Ringer/Mute LED it is referring to the button shown below... -
Page 17: Earpiece-Jack Mode
SatDOCK-G 9555 Installation & User Manual Earpiece-Jack Mode Send Tracking Position The SatDOCK-G 9555 allows a user to utilise a 2.5mm earpiece In order to send a tracking message, the following condition must plugged into the right side of the 9555 handset. be fulfilled. -
Page 18: Satdock-G 9555 Front Panel
SatDOCK-G 9555 Installation & User Manual SatDOCK-G 9555 Front Panel... -
Page 19: Led Reference
SatDOCK-G 9555 Installation & User Manual LED Reference GREEN ORANGE Auto-answer Outgoing Enabled audio is muted 9555 Frame Privacy/DPL FLASHING Sync not handset in ready use or 9555 in earpiece mode during calls. Charging mode due to the ALTERNATING communications failure with a docked 9555 BLUE ORANGE... -
Page 20: Data Communications
SatDOCK-G 9555 Installation & User Manual Data Communications USB Driver Installation The SatDOCK-G 9555 USB data port requires an interface The SatDOCK-G 9555 provides the convenience of accessing driver to be installed on the user’s computer prior to Iridium data services via the mini-USB connector located on undertaking data communication. -
Page 21: At Commands
SatDOCK-G 9555 Installation & User Manual AT Commands Iridium 9555 Display Definitions Display Status indicators and Icons When utilizing the USB data communication port, the SatDOCK-G 9555 cannot activate AT commands that could The following icons will appear in your 9555 handset display to interrupt the SatDOCK-G 9555’s synchronization with the 9555 provide you with various information about the phone’s activity. -
Page 22: Power-On Messages
SatDOCK-G 9555 Installation & User Manual Power-On Messages Assuring Quality of Iridium Service Once your phone is powered on, you may see: Iridium is committed to providing subscribers around the world with consistent, reliable, quality voice and data access all day, every day. -
Page 23: Symptoms Of Rf Interference
Canada: Cert# 5123A-BGTWT11E Japan:07215089/AA/00 Legal The Bluetooth® word, mark and logos are owned by the Bluetooth® SIG, Inc. and any use of such marks by Beam Communications is under license. Other trademarks and trade names are those of their respective owners. -
Page 24: Cradle Mounting Dimensions
SatDOCK-G 9555 Installation & User Manual Cradle Mounting Dimensions SatDOCK-G 9555 Dimensions in millimeters GPS MODULE (INTERNAL) Receiver Type 14 tracking channels, 51 Acquiring, L1 frequency (1575.42MHz) Update rate Accuracy Position 2.5mCEP, Velocity 0.1m/s, Timing 300ns Acquisition TTFF Cold 29sec, Hot 1sec Sensitivity -161 dBm Operational Limits... -
Page 25: Trouble Shooting
For additional product support: If the battery is not flat, please remove the 9555 handset from BEAM Communications Pty Ltd the SatDOCK and clean its bottom connector. Also check the SatDOCK base connector and make sure there are no damaged 8 Anzed Court, Mulgrave pins on this connector. -
Page 26: Beam Warranty Conditions
BEAM. BEAM Communications does not warrant any installation, maintenance or service of the Products not performed by BEAM, nor does it warrant the use of Products with unapproved ancillary products. BEAM Communications will correct any defects in material or... - Page 27 WEB: www.beamcommunications.com EMAIL: info@beamcommunications.com PHONE: +61 3 8588 4500 FAX: +61 3 9560 9055 AFRICA | ASIA | AUSTRALIA | EUROPE | MIDDLE EAST | NORTH AMERICA | SOUTH AMERICA...