Beam IsatDock DRIVE User Manual
Hide thumbs
Also See for IsatDock DRIVE:
- User manual (32 pages) ,
- Quick start manual (2 pages) ,
- User manual (29 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Beam IsatDock DRIVE
Summary of Contents for Beam IsatDock DRIVE
- Page 1 IsatDock DRIVE User Manual...
-
Page 2: Inmarsat Isatdock Drive Part Number
Information furnished by BEAM Communications Pty Ltd (BEAM) is believed to be accurate and reliable. However, no responsibility is assumed by BEAM for its use, or for any infringement of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of BEAM. -
Page 3: About Beam Communications
Inmarsat Satellite Network. Beam’s commitment to be at the forefront has continued to increase its share of the global satellite communications market. Its premium distribution BEAM Communications Pty Ltd network spans the world. -
Page 4: Conventions In This Manual
The Inmarsat IsatPhone Pro handset ® The ® symbol, mark and logos are owned by the respective companies of which the symbol follows. Any use of such marks by Beam Communications is under license. Other trademarks and trade names Note/Important/Tip Header are those of their respective owners. -
Page 5: Package Contents
To configure the alert / tracking functionality on Quick Start Guide your IsatDock, you must first install the IsatDock Management System (IDMS) software, which IsatDock Management System (IDMS) also includes the Beam USB drivers for Microsoft is available for download from: Windows based operating systems. http://www.beamcommunications.com/ support/isatdock/IDMS... -
Page 6: Table Of Contents
CONTENTS Privacy Handset Use Inmarsat IsatDock Drive Part Number Aircraft (Optional Accessory) Vehicles Equipped with an Air Bag About Beam Communications Mute Mode IsatDock LITE Key Features Conventions in this Manual USB Driver Installation Tracking/Alert Monitoring Terminology Tracking and Alert Operations... -
Page 7: Safety Information
Safety Extra Low » areas where fuel odors are present (for The IsatDock DRIVE is a low power docking station Voltage (SELV) requirements of IEC60950. example, if a gas/propane leak occurs in a for the IsatPhone Pro handset. When ON, it will car or home);... -
Page 8: Safety Inmarsat Transceiver Isatphone Pro
Safety Inmarsat Transceiver IsatPhone Pro Your handset is a low power radio transmitter » International Commission on Non-Ionizing and receiver. When it is ON, it receives and Radiation Protection (ICNIRP) 1996 also sends out radio frequency (RF) signals. » Verband Deutscher Elektrotechniker WARNING (NOTE: Refer to Inmarsat IsatPhone Pro (VDE) DIN-0848... -
Page 9: Isatdock Fcc Information
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. IsatDock DRIVE - Installation & User Manual... -
Page 10: Electronic Devices
Electronic Devices Other Medical Devices Posted Facilities Most modern electronic equipment is shielded If you use any other personal medical device, Turn your phone OFF in any facility where from RF signals. However, certain equipment consult the manufacturer of your device to posted notices require such as hospitals and may not be shielded against the RF signals from determine if it is adequately shielded from... -
Page 11: Isatdock Lite Key Features
Inmarsat IsatPhone Pro satellite handset. • Supports privacy handset, optional accessory - Latitude/Longitude Buttons on Dock IsatDock DRIVE allows the IsatPhone Pro handset - Speed to be used in a vehicle, enabling quality hands-free • Ringer volume up/down - Direction calls with echo cancellation and noise reduction •... -
Page 12: Tracking/Alert Monitoring
The tracking function has to be configured and enabled LeoTRAK-Online is Beam’s own global web based on the IsatDock DRIVE via the IDMS. Once turned alert monitoring and tracking application, which ON, tracking and alert messages can be sent to a... -
Page 13: Equipment Overview
Alert Loop (green & brown) Horn Alert (blue) Radio Mute (white) RAM Mounting 10. Privacy Handset Connection 11. Micro USB Data Connection* * Data services scheduled to be available Q1 2011. Firmware upgrade will be required IsatDock DRIVE - Installation & User Manual... -
Page 14: Installation Guidelines
(for vehicle installations) This guide outlines the process for installing the The system is designed to operate in negative IsatDock DRIVE in conjunction with an Inmarsat • Route cables so they are protected from ground 10 to 32 Volt DC electrical systems only. -
Page 15: Installation Procedure
Install the external Inmarsat antenna (accessory) wires. Connect the speaker and microphone to The IsatDock DRIVE is supplied with a universal RAM® the IsatDOCK DRIVE cradle mount bracket that enables mounting to any flat Install the external alert button (optional) - Page 16 Refer to the antennas installation guide Correct installation of the antenna system is a for antenna mounting and location vital part of the IsatDock DRIVE system, to ensure requirements. reliable functionality, and drop-free calls. Connect the antenna cable labelled WARNING “Inmarsat”...
- Page 17 External Speaker and Microphone The IsatDock DRIVE cradle comes with an external Mount the microphone about 30cm away speaker and microphone for hands-free operation. from where you normally speak and ensure the lead is sufficient to reach the cradle. By...
- Page 18 Privacy Handset (Optional – Extra Order) Mount the spacer plate and the mounting The IsatDock DRIVE provides a RJ9 audio bracket to the rear of the IsatDock DRIVE, by Plug the Privacy Handset RJ9 connector socket on the bottom of the docking unit, for...
- Page 19 The entertainment mute output connects to output on the rear cable loom for controlling is OFF and the IsatDock DRIVE is still ON (by the mute input on your car radio, if the radio an external ringer such as a vehicle horn. The default, the IsatDock DRIVE will stay on for includes a mute fuction.
- Page 20 IsatDock DRIVE to be turned off when not in use. By default, the IsatDock DRIVE will stay on for Optional ISD950 AC Plug Pack Installation 20 minutes after this input is switched off.
-
Page 21: Isatdock Lite Usage
NOTE The ‘cover’ in the base of the phone should If the Beam alarm loop is going to be used be in the a 90 degree opened position. with an external button, remember to enable this external loop in the IDMS settings. -
Page 22: Operation Of The Isatphone Pro
Operation of the IsatPhone Pro Pro handset Prepare the Inmarsat IsatPhone Pro The IsatDock DRIVE provides charging power to Ensure that the IsatPhone Pro Handset has the the IsatPhone handset via its USB connector. NOTE: latest compatible firmware installed. For more... -
Page 23: Placing Voice Calls
During a call, Press the Mute button on the (Optional Accessory) handset to indicate the call is progressing. face of the IsatDock DRIVE, a RED LED will Options: Privacy handset Phone Call - Mobile illuminate the Mute button to confirm that... -
Page 24: Tracking And Alert Operations
A single beep will sound (if configured in using the IDMS software via the micro-USB the IDMS). connection to the IsatDock DRIVE. Various configuration options are available Activate Alert Mode to the user in the IDMS. The message delivery Alert mode can be activated by one of the method is also set using the IDMS. -
Page 25: Isatdock Drive Front Panel
A short double beep will sound when exiting change mode. press seconds after the last button press. * This action is optional, only when the Tracking Mode for your IsatDock DRIVE is configured and activated. IsatDock DRIVE - Installation & User Manual... -
Page 26: Isatdock Drive Buttons/Led Lights
IsatDock DRIVE Buttons/LED lights TRACK GREEN YELLOW Tracking enabled, GPS Alert triggered fix acquired. No GPS fix Alert message sent Alert is acknowledged FLASHING MUTE GREEN YELLOW Outgoing audio is muted GREEN YELLOW LED STATUS Handset registered and Handset not registered/... -
Page 27: Assuring Quality Of Inmarsat Service
WARNING Nearby tall buildings or similar structures, devices. This problem is more evident when Failure to use Beam approved antenna cables will heavily leafed trees and mountains can all numerous antennas and broadcasting devices result in degraded performance and may damage degrade performance as they block the signal are located within close proximity to each other. -
Page 28: Specification Summary
Cold 29sec, Hot 1sec Accessories Electrical & Environmental Sensitivity -161 dBm LTO - LeoTRAK-Online Operational Altitude 18000m, Velocity 515m/s Specifications - IsatDock DRIVE ISD715 - Transport Active Antenna (Magnetic) Limits ISD720 - Transport Active Antenna (Bolt) Average Power Current @ Average Watts... - Page 29 (1) Physical Dimensions - Drive Dock (2) Physical Dimensions - Privacy Handset 169.71 42.63 81.74 IsatDock DRIVE - Installation & User Manual...
-
Page 30: Trouble Shooting
Check all the connection cables to and Check the antenna connection. from the IsatDock. Ensure the antenna cable has not been damaged. Ensure that only approved antenna cable has been used. Refer to Antenna Install Guide on Beam website support. -
Page 31: Beam Warranty Conditions
BEAM, nor does it warrant the use that are not covered by a BEAM Communications (without limitation), warranties of merchantability and of Products with unapproved ancillary products. - Page 32 BEAM Communications Pty Ltd 8 Anzed Court, Mulgrave Victoria, 3170, AUSTRALIA Tel: +61 3 8588 4500 Fax: +61 3 9560 9055 Web: www.beamcommunications.com Info: info@beamcommunications.com Support: support@beamcommunications.com www.beamcommunications.com...
Need help?
Do you have a question about the IsatDock DRIVE and is the answer not in the manual?
Questions and answers