Carrier RAV-SP180UT-UL Service Manual page 172

No. Part name
„
Evaporator
(Heat exchanger)
Procedures
1) Follow to the procedure in the item
2) Remove the pipe holder from the rear
side of the main unit.
3) Remove 2 fixing screws at the left side
of the end plate of the heat exchanger.
4) Remove 2 fixing screws on the heat
exchager fixing holder to separate the
heat exchanger from the back body.
ƒ
.
2 screws
– 172 –
Remarks
Screw Screw Screw
Screw Screw Screw