Carrier RAV-SP180UT-UL Service Manual page 149

No. Part name
1. Detachment
Adjust corner
3
cap
NOTE :
The knob is provided to only one side.
Be sure to remove the cap of the knob side
at first.
2. Attachment
Procedure
1) Pull knob of the adjust corner cap to the
arrow direction, remove strap of the
adjust corner cap from pin of the panel
and then remove all the 4 corners of the
cap.
1) Hook the strap of the adjust corner cap
securely to the pin of the ceiling panel.
2) Insert the 2 claws "A" of the adjust corner
cap into rectangular holes of the ceiling
panel in the direction of the arrow.
3) Press the adjust corner cap so that the
3 claws "B" on the back of the cap are
fitted.
Adjust corner cap
Rectangular
holes
Claws "B"
– 149 –
Remarks
Pulling direction Pulling direction Pulling direction
Claws "A" (Insert to fit)
Pin
Claws "B" (Push to fit)
Firmly push edges
of the adjust corner cap.
Knob
Claws "A"