Hangar 9 Clipped-wing Taylorcraft Instruction Manual page 45

Section 16: Attaching the Cowling
Step 6. Locate the cowl hold down screw locations. The use of
a paper template will ease location of screw holes in cowl.
Step 7. Use a 1/16" drill bit to drill pilot holes in the cowl.
Note: Be sure the cowl is pulled down tightly and held
securely prior to drilling a hole. As each hole is drilled,
check to make sure the cowl has not moved. Insert the
rubber grommets into the holes to help reduce vibration
and subsequent cracking of the cowling. Use blind nuts to
mount the cowl to the fuselage.
Step 8. Epoxy the cooling shroud (scoop) to the top of the cowl.
CONTINUED
45