Indicators On The Control Panel - Fujitsu PRIMERGY RX300 S6 Operating Manual

5.1.1.2

Indicators on the control panel

Power-on indicator (two colors)
Lights up green when the server is switched ON.
Lights up orange when the server is switched OFF, but mains
voltage is present (standby mode).
Hard disk activity indicator (green)
Lights up green when an internal drive (HDD or backup drive) is
being accessed.
Global Error indicator (orange)
!
– Lights up orange if a prefailure event has been detected that
requires (precautionary) service intervention.
– Flashes orange if an error was detected that requires service
intervention.
– Does not light up if there is no critical event.
If the event is still acute after a power failure, the indicator is
activated after the restart.
The indicator also lights up in standby mode.
You can find more details on the indicated errors in the System
Event Log (SEL), on the ServerView Local Service Panel, on the
ServerView Local Service Display, in the ServerView Operations
Manager or via the iRMC S2's Web interface.
RX300 S6
Operating manual
Controls and indicators
69