Replacing An Expansion Card - Fujitsu PRIMERGY RX300 S6 Operating Manual

8.2.2

Replacing an expansion card

Ê The illuminated orange indicator shows which is the slot for the defective
expansion card.
Figure 39: Removing the expansion card
Ê If necessary, disconnect the cables from the defective expansion card.
Ê Loosen the screw on the rear cover (see circle).
Ê Remove the defective expansion card from the server (see arrows).
I
For the installing order see the configurator provided for the RX300 S6:
http://ts.fujitsu.com/products/standard_servers/index.htm
(for the EMEA market)
http://primeserver.fujitsu.com/primergy/system.html
RX300 S6
Operating manual
Non-hot-plug components
for the Japanese market
117