Installation In A Telecommunication Rack With 48 Vdc Power - Fujitsu PRIMERGY RX300 S6 Operating Manual

4.2.4 Installation in a telecommunication rack with 48 V
DC power
I
The support systems from Fujitsu are suitable for use in any 3rd party
racks for standard servers (installation depth 714 - 785 mm) without
restrictions.
Ê Refer to the manual from the rack manufacturer for details of the mechanical
installation and the climatic conditions.
V
CAUTION!
When installing in 3rd party racks, it must be ensured that an air flow
from the front to the back of the rack is guaranteed.
Ê Fit the required original parts (support bracket or cable management
system).
I
Under certain circumstances, you will not be able to use some of the
parts from the rack installation kit supplied - you will need to use
original 3rd party rack parts instead.
Ê Refer to the manual from the rack manufacturer for details of the electrical
installation. The wires of the power cable must be connected to the dc power
as described in the maufacturers manual.
RX300 S6
Installing/removing the server in/from the rack
Operating manual 59