Control Elements - Fujitsu PRIMERGY RX300 S6 Operating Manual

Controls and indicators
5.1.1.1

Control elements

On/Off button
When the system is switched off, it can be switched on again by
pressing the On/Off button.
When the system is operating, pressing the On/Off button will
switch off the system.
I
NMI button
NMI
V
Reset button
RST
Pressing the reset button reboots the system.
V
ID button
ID
Lights up (blue) on the front and on the rear of the server when the
ID button is pressed. Both ID indicators are synchronized.
68
The On/Off button does not disconnect the server from the
mains voltage. To disconnect from the mains completely,
remove the power plug(s).
CAUTION!
Do not press! Risk of loss of data! The NMI button may only
be used by service.
CAUTION!
Risk of loss of data!
Operating manual
RX 300 S6