Fujitsu PRIMERGY RX300 S6 Operating Manual page 54

Installing/removing the server in/from the rack
Ê Insert (3) the safety lock into the easy lock (snap fit).
V
CAUTION!
Ensure that the safety lock has been inserted before the server is
inserted!
Ê Repeat the above steps for the right-hand support system (with the front and
rear right support uprights).
Ê Fit the PRIMECENTER/DataCenter rack cable management as described in
the technical manual for the corresponding rack.
Figure 10: Position of the cage nuts
Ê Fit the cage nuts for securing the server in the corresponding catches on the
right and left support uprights.
54
5
Operating manual
5
RX
10
5
1
300 S6