Fujitsu PRIMERGY RX300 S6 Operating Manual page 56

Installing/removing the server in/from the rack
Inserting the server
I
For the Japanese market:
Refer to the " Rack Mounting Guide" for more detailed explanation and for
other support systems.
1
Figure 12: Inserting the server
V
CAUTION!
Ensure that the safety lock has been inserted before the server is
inserted (see
V
CAUTION!
At least two people are needed to position the server in the rack.
(For the Japanese market, please refer to " 安全上の注意およびその他の
重要情報 ".)
Ê Extend the telescopic rails completely to the front (1).
I
They must click into place so that they can no longer be moved.
Ê Insert the prepared server into the protruding interior telescope rails (2) until
the rails engage.
Ê Release the locking mechanism of both telescopic rails - see (3a) for fully
extending rails and (3b) for partially extending rails.
Ê Push the server as far as it will go into the rack (4).
Ê Fasten the server to the rack (5) using the two knurled screws (front panel).
56
3a 3b
2
figure 9 on page 53).
Operating manual
4
5
RX
4
5
300 S6