Leveling And Lagging Down The; Appliance - Required; Accessories - Heat & Glo PALOMA-BL Owner's Manual

C. Leveling and Lagging Down the Appliance
LAGGING THE APPLIANCE DOWN
IS REQUIRED.
WARNING
Tipping Risk
• Install appliance on a stable, level platform/
floor strong enough to support appliance
without tipping.
• USE wood flooring, ceramic tile, brick hearth
or high pressure laminate flooring applied
directly over the sub-flooring material.
Leveling screws
Lag bolt hole
After unbolting the appliance from the pallet, insert
Figure 8.4
two 1/4 20 x 1/1/2 counterscrews.
Using pliers, adjust the counterscrews to level the appli-
ance.
Page 32
Figure 8.5
center hole in the bottom plate (lagging clearance hole). The
appliance must be lagged down securely to prevent tipping
forward.
Figure 8.6
appliance.
D. Accessories
Install approved accessories per instructions included with
accessories. Refer to Section 12 for appropriate accesso-
ries.
Heat & Glo · Paloma · 7031-220G
Place the lag bolt from the component bag in the
Using pliers, adjust the counterscrews to level the
WARNING
Shock or fire risk.
Use ONLY optional accessories approved for
this appliance.
• U s i n g n o n - l i s t e d a c c e s s o r i e s v o i d s
warranty.
• Using non-listed accessories may result in a
safety hazard.
• Only Hearth & Home Technologies approved
accessories may be used safely.
LAGGING
CLEARANCE
HOLE
February 8, 2006