Package Contents; Safety - eXact PipeCut 280E System Operating Instructions Manual

Information
Noise/Vibration Information
Measured values determined according to EN60745.
Wear hearing protection!
Vibration total values (triax vector sum) determined according to EN60745:
Vibration emission value a
The vibration emission level given in this information sheet has been measured in accordance with
a standardised test given in EN 60745 and may be used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
WARNING: The declared vibration emission level represents the main applications of the tool.
However if the tool is used for different applications, with different accessories or poorly
maintained, the vibration emission may differ. This may signifi cantly increase the exposure level over
the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the
tool is switched off or when it is running but not actually doing the job. This may signifi cantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as:
maintain the tool and the accessories, keep the hands warm, organisation of work patterns.
Exact PipeCut 280E pipecutting system,

Package contents:

Please check the package contains the following items:
1. Pipecutting System case
2. Exact PipeCut 280E pipe saw
3. Cutting supports × 4
4. Operating instructions
5. Hex socket key 5 mm and 2 mm fi tted to the machine
6. TCT blade 165 × 62 fi tted on the machine
7. DVD-video disc with instructions
1.
2.
2
=2,84 m/s , UncertaintyK =1.5 m/s
h
3.
2
.
7
english
4.
5.
6.
7.