Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for eXact PipeCut 410E
Summary of Contents for eXact PipeCut 410E
- Page 1 PipeCut 280E/410E System Operating Instructions 5-16 Exact Tools Oy Särkiniementie 5 B 64 00210 HELSINKI FINLAND Tel + 358 9 4366750 FAX + 358 9 43667550 exact@exacttools.com patents: US 7,257,895, JP 4010941, EP 1301311, FI 108927, KR 10-0634113 www.exacttools.com...
- Page 2 Exact PipeCut 280/410 System Blade information for Exact PipeCut saws TCT (tungsten carbide tip) saw blades are for cutting steel, copper, aluminium and all kind of plastics. TCT blades can be sharpened. Cermet (ceramic alloy tip) saw blades are for cutting stainless steel, acid proof materials, steel, copper, aluminium and all kind of plastics.
- Page 4 Declaration of Conformity We declare under our sole responsibility that the pipe cutting machine, Exact PipeCut 280E/410E described under “Technical Data” are in conformity with the following standards or standardization documents: EN60745-1, EN60745-2-5, EN55014-1, EN 55014-2, EN61000-3-2, EN61000-3-3 according to the provisions of the directives 2014/30/EU, 2006/42/EC.
-
Page 5: Table Of Contents
15. Maintenance and servicing instructions 15. Environment/Disposal 15. Guarantee/Guarantee conditions 16. Tips for using Exact PipeCut saws Exploded view (separate attachment) Defi nitions: Safety guidelines The defi nitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols. -
Page 6: Information
Also store this instruction book somewhere accessible to everyone using the pipe saw. In addition to these instructions, always follow the offi cial work, health and safety regulations. The Exact PipeCut is meant for professional use only. Technical data... -
Page 7: Package Contents
Package contents: Please check the package contains the following items: Pipecutting System case Exact PipeCut 280E or 410E pipe saw Cutting supports × 4 Operating instructions Hex socket key 5 mm (and 2 mm in 280E) fi tted to the machine TCT blade 165 ×... -
Page 8: Safety
Safety English... - Page 9 Safety English Support large panels (pipes) to minimise the risk of blade pinching and kickback. Large panels (pipes) tend to sag under their own weight.
-
Page 10: Product Features
Safety English Intended Use PipeCut 280E / 410E: The PipeCut 280E/410E pipe saw is intended for use as a pipe fi tter’s tool at the installation site. The PipeCut 280E/410E pipe saw can only be used to cut round pipes, with a diameter of 280E: 40 mm –... -
Page 11: Before Operating The Tool
Operation English Exact PipeCut 280E/410E Fig B open closed pipecutting system operating instructions Before operating the tool Ensure that the motor unit is in the upright position. The yellow mark of the UNLOCK button is visible. Check that the blade is correctly fi tted, in... -
Page 12: Attaching The Pipe Saw To The Pipe
Operation English Attaching the pipe saw to the pipe Fig F Open the pipe saw’s gripper unit enough to suit the diameter of the pipe by rotating the adjustment handle located at the rear of the saw (Fig F/1). Position the pipe saw on top of the pipe so that the edge of the lower blade guard is at the cutting mark. -
Page 13: Overload Protection And Rotation Speed Control
Operation English When the pipe is cut off, push the UNLOCK Fig J button forward until the yellow mark is visible and the locking is released (Fig L/1). Now raise the motor unit to starting position (Fig L/2). Release the power switch (Fig L/3). When the blade has stopped, open the gripper safety mechanism (Fig L/4) and disengage the pipe saw from the pipe by loosening the gripper... -
Page 14: Model 410E Cutting Result Adjustment
Operation English To adjust the wheel, loosen the locking screw Fig N (Fig N/1) and turn the wheel centre clockwise or counter clockwise to the desired position (Fig N/2), and lock the wheel again (Fig N/3). If the saw has moved from right to left (Fig M/a) rotate the center part of the adjusting wheel so that the “d”... -
Page 15: Maintenance And Servicing Instructions
Gripper unit the Warranty Term or *Extended Warranty Clean the gripper unit regularly with compressed Term at our discretion we will repair the Exact air. Lubricate the gripper’s wheel axles (Fig Q/1) PipeCut Saw or supply an entirely new or factory and its joints (Fig Q/2). -
Page 16: Tips For Using Exact Pipecut Saws
Tips English Note: The Exact PipeCut Saw is to be shipped Keep the feeding speed constant. This will to the Authorized Warranty Repair Center freight extend the lifetime of the blade. For example prepaid. If the Exact PipeCut Saw is repaired cutting time for a steel pipe diameter of 6’’...
Need help?
Do you have a question about the PipeCut 410E and is the answer not in the manual?
Questions and answers