Universal Serial Bus Connectors - DFI BL600-DR User Manual

Universal Serial Bus Connectors

USB 11
USB 10
USB 9
USB 8
The system board supports 12 USB 2.0/1.1 ports. USB allows data
exchange between your computer and a wide range of simultane-
ously accessible external Plug and Play peripherals.
The USB 0-5 connectors allow you to connect 6 additional USB 2.0/
1.1 ports. The USB ports may be mounted on a card-edge bracket.
Install the card-edge bracket to an available slot at the rear of the
system chassis then insert the connectors that are attached to the
USB port cables to these USB connectors.
BIOS Setting
Configure the onboard USB in the Integrated Peripherals submenu
("USB Device Setting" section) of the BIOS. Refer to chapter 3 for
more information.
USB 7
USB 6
Hardware Installation
USB 2-1
USB 8-7
USB 5-4
9 1
1 0
2
2
33