System Memory - DFI BL600-DR User Manual

2
Hardware Installation
Warning:
. .
.
.
.
.
.
.
Electrostatic discharge (ESD) can damage your system board, proces-
sor, disk drives, add-in boards, and other components. Perform the
upgrade instruction procedures described at an ESD workstation only.
If such a station is not available, you can provide some ESD protec-
tion by wearing an antistatic wrist strap and attaching it to a metal
part of the system chassis. If a wrist strap is unavailable, establish
and maintain contact with the system chassis throughout any proce-
dures requiring ESD protection.

System Memory

The system board supports 240-pin DDR2 DIMM sockets. The four
DDR2 DIMM sockets on the system board are divided into 2 chan-
nels:
16
Channel A - DDR2-1 and DDR2-2
Channel B - DDR2-3 and DDR2-4
DDR2-1
Channel A
DDR2-2
DDR2-3
Channel B
DDR2-4