DFI BL600-DR User Manual page 77

IDE HDD Block Mode
Enabled The IDE HDD uses the block mode. The system BIOS
will check the hard disk drive for the maximum block
size the system can transfer. The block size will depend
on the type of hard disk drive.
Disabled The IDE HDD uses the standard mode.
IDE DMA Transfer Access
This field is used to enable or disable the DMA transfer function of
an IDE hard drive.
SATA Mode
IDE This option configures the Serial ATA drives in IDE mode.
RAID This option enables the RAID function for Serial ATA
drives.
AHCI This option configures the Serial ATA drives in AHCI
mode.
Legacy Mode Support
The options are Enabled and Disabled.
3
BIOS Setup
7 7