DFI BL600-DR User Manual page 67

CPU Feature
This field is used to configure the CPU that is installed on the sys-
tem board. Move the cursor to this field then press <Enter>.
PPM Mode
Limit CPUID MaxVal
C1E Function
Execute Disable Bit
Virtualization Technology
↑↓
: Move
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.
PPM Mode
The options are Native Mode and SMM mode.
Limit CPUID MaxVal
The CPUID instruction of some newer CPUs will return a value
greater than 3. The default is Disabled because this problem does
not exist in the Windows series operating systems. If you are using
an operating system other than Windows, this problem may occur. To
avoid this problem, enable this field to limit the return value to 3 or
lesser than 3.
C1E Function
The options are Auto and Disabled.
Execute Disable Bit
When this field is set to Disabled, it will force the XD feature flag to
always return to 0.
Phoenix - AwardBIOS CMOS Setup Utility
CPU Feature
Native Mode
Disabled
Auto
Enabled
Enabled
PU/PD/+/-: Change Priority
F6: Fail-Safe Defaults
BIOS Setup
Item Help
Menu Level
F10: Save ESC: Exit
F7: Optimized Defaults
3
6 7