Replacing The Fuser Unit - Toshiba e-STUDIO287CS User Manual

Replacing Consumables / Maintenance Units
6
Install the image drum cartridge.
(1) Make sure that the label color of the image
drum cartridge matches the label color in
1
the machine.
(2) Gently install the image drum cartridge.
2
7
Close the top cover.
3
4
8
Return the document holder to its original
position.
Document holder
5
6
Memo
• If you dispose of used image drum cartridges yourself, be
sure to place them in a plastic bag and follow local
regulations for proper disposal.
7
Image drum
cartridge
Top cover
- 60 -

Replacing the Fuser Unit

Recommendation for Replacing the Fuser Unit
When the fuser unit nears the end of its lifespan, the message
[Time to Replace Fuser] will appear on the touch panel to notify
you that it is time to prepare a new fuser. You can continue
printing until the message [Replace Fuser] appears, then
printing will stop.
The fuser unit is recommended to be replaced after about
60,000 prints on A4-sized paper (single-sided printing).
Memo
• After [Time to Replace Fuser] appears, you can continue to
print until [Replace Fuser] appears.
Note
• Even after the message [Replace Fuser] appears, you may
still continue to print by opening and closing the top cover;
however, this may lead to paper jams and other problems.
We recommend replacing the fuser unit as soon as
possible.
Replace the fuser unit
1
Press the [ON/OFF] button until a "pip"
sound is heard. "Shutdown is in progress."
appears for a while, and then the power is
turned OFF.
Note
• Do not turn off the device abruptly. It can cause
malfunctions.