Client Software Authentication Problems; Cannot Log In Using Client Software - Toshiba e-STUDIO287CS User Manual

No certificate
Peer error certificate
Peer error no certificate
Peer no cipher
Peer error unsupported certificate type
Peer unexpected message
Unknown remote error type
Unsupported certificate
Unknown ca
Unable to connect

Client Software Authentication Problems

Cannot log in using client software

Problem Description
I cannot log into the equipment using client software.
Corrective Action
If you cannot log into the equipment using client software, contact the administrator of the equipment. Since the user name and
password registered in the client software are used for authentication in the case of automatic login, the log-in screen may not be
displayed.
Message
TROUBLESHOOTING FOR NETWORK CONNECTIONS
Corrective Action
No certificate is installed or you do not specify the certificate file
name. Make sure to install the certificate and specify the
certificate file name correctly.
Installed CA certificate cannot verify the server certificate in the
RADIUS server.
Make sure to install a correct CA certificate.
The RADIUS server operates the communication with the
certificate using the TLS protocol.
The RADIUS server requests the unsupported encryption for this
equipment.
This equipment uses the certificate that the RADIUS server does
not support.
The RADIUS server sends the message that is not TLS
standard. Confirm the settings on the RADIUS server.
The RADIUS server sends the alert message of illegal TLS.
This equipment uses the certificate that the RADIUS server does
not support.
Installed CA certificate cannot verify the server certificate in the
RADIUS server.
Make sure to install a correct CA certificate.
Ask the administrator.
- 41 -
1
2
3
4
5
6
7