Dress Panel Rh Side - 5600 Model - GE ZBD5900 Technical Service Manual

5.2.45 Dress Panel RH Side - 5600 model

CAUTION. Switch off electrical power supply.
5.2.45.1 Remove control panel (Section 5.2.40), timer
control-knob (Section 5.2.41) and power select knob
(Section 5.2.42).
5.2.45.2 Removal of the dress panel RH side is similar in
procedure to the dress panel LH side. Unlatch the two
bottom clips which hold the dress panel RH side to the
carrier frame and lift clear.
Control panel RH side cover.
5.2.45.3 To reinstall, engage the two top clips into the two
slots in the control panel and carrier frame and re-latch the
bottom clips to secure.
5.2.45.4 Reassemble the dishwasher in reverse order.
5.2.45.5 Operate and test the dishwasher before leaving.
5.2.46 Door Handle - 5600, 5700 & 5900 Models
CAUTION. Switch off electrical power supply.
5.2.46.1 For models 5600 and 5700, remove the control
panel (Section 5.2.40). For model 5900, remove the door
panel (Section 5.2.3). Remove dress panel LH side (Section
5.2.44) and dress panel RH side (Section 5.2.45).
Door handle.
5.2.46.2 Compress the detent clip of the leaf spring on the
end adjacent to the door lock microswitch.
5.2.46.3 Slide the leaf spring through the two retaining slots
formed in the control panel carrier frame. You must com-
press the detent clip again in order to pass it through the
opposite side slot. Lift the leaf spring clear.
5.2.46.4 Grasp the door handle on one end and lift outward
to unclip the nozzle from the control panel carrier frame.
5.2.46.5 With one door handle nozzle unclipped from the
control panel carrier frame retainer, exert pressure on the
opposite side to release the door handle.
handle clear.
5.2.46.6 Reassemble the dishwasher in reverse order.
5.2.46.7 Operate and test the dishwasher before leaving.
61
Lift the door