Upper Basket Feed Pipe; Load Collector - GE ZBD5900 Technical Service Manual

5.2.14.4 Slide the rail guides out and clear from the wheel
guides.
5.2.14.5 Remove the wheel guide axles as shown below.
5.2.14.6 Ensure the stainless steel cup washer, which
houses the rubber "O" ring, is identified with the recess side
of the washer to the surface of the tub.
5.2.14.7 Refer to the illustration below for the correct
assembly of the wheel guide axle, wheel guide, stainless
steel cup washer and rubber "O" ring.
5.2.14.8 Reassemble the dishwasher in reverse order.
5.2.14.9 Operate and test the dishwasher before leaving.

5.2.15 Upper Basket Feed Pipe

The upper basket feed pipe is a polyethylene blow moulding
mounted on the top external surface of the tub. It is held in
position by the screwed spray nozzle which is located on the
top internal surface of the tub. A neoprene sealing washer is
fitted to the threaded and flanged outlet nozzle of the upper
basket feed pipe, which is compressed by the threaded
spray nozzle and forms an effective seal between the
external surface of the tub and the flange of the upper basket
feed pipe .
The photo below shows the upper basket feed pipe and
spray nozzle removed from the tub.

5.2.16 Load Collector

Positioning lug bracket
Hinged flap to vent tub.
43
Feed Pipe Spray Nozzle
Load collector nut
Hose nozzles
Circular rubber gasket