Loading Silverware Basket - GE GLD8000 Series Owner's Manual

LOADING SILVERWARE BASKET

Load the silverware basket while it is in the bottom rack or remove the basket and place it
on a counter or table for loading. (See recommended loading pattern shown)
NOTE: Unload or remove the basket before unloading the racks to avoid spilling water
droplets on the silverware.
• Load items with covers down, using the separators to prevent silverware nesting.
• Place small items such as baby bottle caps, jar lids, corncob holders, etc. in the
section(s) with hinged cover(s). Close the cover to hold small items in place.
• When covers are up, mix items in each section of the basket with some pointing up and
some pointing down to avoid nesting. Spray cannot reach nested items.
IMPORTANT: Alsways load sharp items (knives, skewers, etc.) pointing down.
NOTES:
• Do not load silver or silver-plated silverware with stainless steel. These metals can be
damaged by contact with each other during washing.
• Some foods (such as salt, vinegar, milk products, fruit juices, etc.) can pit or corrode
silverware. Run a rinse cycle if you have a full load to wash immediately.
English
12