Introduction; Platinum® R3; About This Guide; Symbols Used - Platinum 5500 R3-S2B User And Installation Manual

1

Introduction

1.1 PLATINUM® R3
PLATINUM® R3-series inverters are three-phase feed-in inverters for different power
ranges; see "Technical data" on page 44.
The PLATINUM® network (EIA485) can be used to connect up to 50 PLATINUM®
inverters to one inverter system.
Options
The following options are available to enhance an inverter or inverter system:
▪ Remote monitoring/readout with PLATINUM® WebMaster
▪ Remote controlled AC power reduction via an external monitoring device

1.2 About this guide

This installation and user guide explains how to install and operate PLATINUM® inver-
ters of type 5500 R3-S2B, 7000 R3-S2B, 8000 R3-S2B, 9000 R3-S2B.
Additional documents
The following additional documents are available in the download area of our website
www.platinum-nes.com.
▪ Detailed installation and user guide
▪ Information on fault current protection devicesv
▪ Complete event list for detecting/eliminating errors
▪ Overview of country and grid codes
▪ Declaration of conformity and certificates
▪ Manufacturer's warranty of PLATINUM GmbH

1.3 Symbols used

1.3.1 Structure of warnings
SIGNAL WORD
Type, source and consequence of the hazard!
f Measures to avoid the hazard.
Installation and user guide PLATINUM® inverter 5500 R3-S2, 7000 R3-S2, 8000 R3-S2, 9000 R3-S2
Introduction
5