Platinum 5500 R3-S2B User And Installation Manual page 23

Change de-
vice number
/ reassign
numbers
Exchange
inverter
Installation and user guide PLATINUM® inverter 5500 R3-S2, 7000 R3-S2, 8000 R3-S2, 9000 R3-S2
If different numbering is required, choose YES using the /
buttons and choose OK to open the menu for changing device
numbers. The following screen appears on all inverters in the
network.
– On the desired first inverter, confirm NEXT NUMBER? with
OK. The number 1 will be assigned to the inverter.
– Confirm NEXT NUMBER? with OK for every inverter in the
network in the order desired. The next number in each case
will be assigned to the inverter.
This menu option appears only if a new inverter is detected in
an existing network. In this case, the numbers of the inverters
replaced can be used.
This must be configured on every inverter replaced.
▪ If the number displayed (of the inverter replaced) is to be used,
confirm with YES and continue to the next menu.
▪ If different numbering is required, choose NO using the /
buttons and choose OK to open the menu for changing device
numbers.
Initial operation
23