Platinum 5500 R3-S2B User And Installation Manual page 35

Example: Parameter 1007 VoltMon (voltage monitoring)
6.5.4 MPP-Mode service menu
MPP mode
Default
Shadow mode
▪ Shaded systems should also be run initially in the MPP mode NOR-
MAL.
▪ In the MPP SHADOW mode, the ideal yield may not be achieved
because only a low level is fed in during the MPP search.
Installation and user guide PLATINUM® inverter 5500 R3-S2, 7000 R3-S2, 8000 R3-S2, 9000 R3-S2
Parameter 1007
Parameter 1007
▪ with submenus 1007.0 and 1007.1
Parameter 1007
▪ with submenus 1007.0 and 1007.0.0
▪ with the current value for 1007.0.0
▪ Default MPP mode for free module surface
▪ For systems with shadowing (e.g. through trees), the MPP area
is frequently subject to complete scans.
Menu
35